Invisible-zipper foot #35 is ideal for inserting zippers invisibly into garment seams. In addition, this presser foot is a reliable helper when sewing home furnishings and accessories.
Two diagonal grooves act as a guide, making zip insertion a breeze compared to the standard method. Located in the sole of the foot, the grooves easily accommodate the zipper coils, which are fed through at the same time as the zipper tape is guided under the foot and sewn.
Three-sole walking foot with seam guide #50 is a wiz at working with challenging fabrics. Especially well suited to machine quilting and to sewing “sticky” materials, this foot also helps you match stripes and plaids by preventing the fabrics that are being stitched together from shifting.
Three-sole walking foot with seam guide #50 features a standard sole, a special quilting sole, and a sole with a central guide for edgestitching and stitching in the ditch. In addition, its two seam guides help you sew accurately. The result: projects with consistent stitching and perfectly matched patterns.
Discover your Three-sole walking foot with seam guide #50 in the BERNINA accessories range now!
Edgestitch foot #10C is a practical help for sewing finished edges even and straight. Superbly suited to applying lace and trims, Edgestitch foot #10C is also ideal for topstitching edges, pleats and hems.
The guide blade in the center of the foot helps you sew seams and hems running perfectly parallel to the edge in next to no time.
Circular embroidery attachment #83 lets you embroider unusual and decorative circles or semicircles. The attachment is screwed to the free-arm. The center of rotation can be either to the right or left of the needle, with the attaching screw lying flat enough to allow the fabric to feed smoothly over it. A diameter of between 1 inch and 5-5/16 inches (2.5 cm and 13.5 cm) can be set on the slide.
The fabric must be properly reinforced for circular embroidery, so 2-3 layers of stabilizer should be placed under your project. The fabric is put onto the pin at the center of the desired circle and held in place with a rubber cap to prevent shifting during sewing. The Circular embroidery attachment #83 can be used in conjunction with various presser feet, and will enable you to sew circles with any decorative stitches you wish, and even arrange lettering in a circle.
Order the Circular embroidery attachment #83 now, and you too will be able to sew circles of pintucks, cords, and sequins.
This foot allows you to sew along longarm quilting rulers to create decorative quilt designs such as lines, feathers, circles etc. Any commercial Plexiglas longarm quilting rulers with a ¼ inch thickness can be used. The height of the sole of the foot makes it possible to quilt along all the edges of these rulers which is of utmost importance especially with circles.
With this technique the feed dog is lowered and the fabric with the Plexiglas ruler is guided manually with the base of the foot resting against the edge of the ruler. Due to the adjustment dial the height of the foot can be adjusted to match the fabric thickness individually so that the fabric can be moved smoothly and without getting stuck. Moreover, this additional option provided by the adjustable foot height extends the scope of applications for BERNINA sewing machines without the function ‘automatic presser foot pressure/presser foot height’.
Piping foot #38 is often also termed the “uneven foot”, owing to the different thicknesses of the two halves of its sole. Consequently, this foot is ideal for creating narrow-to-medium piping, as well as for sewing unevenly thick fabric layers.
The right side of Piping foot #38 is higher than the left side, allowing it to ride easily over the fabric layers as you sew. In addition to piping, this foot is also suitable for sewing on thick tape and ribbon, cords, or hook-and-loop tape.
TIP: when sewing on tape, the tape should lie under the right side of the foot flush with the edge of the thicker left side. This will allow the needle to catch the edge of the tape more easily.
With its hopper mechanism, Embroidery foot #15 is ideal for darning and free-motion embroidery with or without the BERNINA embroidery module.
The vertical spring on the presser foot presses the sole to the fabric, preventing the material from pulling up with the needle (flagging). The result is a neat, consistent stitch pattern. What’s more, this oval foot with its slight upward tilt facilitates the stitching movement, even over bulky materials.
Pintuck and decorative-stitch foot with clear sole #46C makes it a breeze to sew fetching pintucks and then embellish them evenly.
The clear sole provides a perfect view of the stitching area at all times. The pintucks are sewn first, with the finished pintucks lying in the grooves on the bottom of the foot. In a second step, the Pintuck and decorative-stitch foot with clear sole #46C is used to embellish the pintucks with precisely parallel lines of stitching – so there’s no need to trace the lines beforehand.
The Straight-stitch plate is a professional tool for large and small straight stitch projects. It guarantees precise stitch formation when sewing using straight stitch, thus ensuring clean, attractive sewing results. The slightly larger hole compared to the standard straight stitch needle plate guarantees great results.
Due to its excellent stabilisation and guidance of the material, the Straight- stitch plate is also suitable for various embroidery techniques as well as other demanding sewing projects, such as patchwork.
Enjoy easy, comfortable sewing using straight stitch – order the Straight- and CutWork stitch plate from the BERNINA range of special sewing accessories!